SME VoIP System Guide, Version 1.9
Proprietary and Confidential
Chapter: SME VoIP Administration Interface
5.12.4 Base Station Group
The Base station group list various parameter settings for base stations including chain level information.
Screenshot:
Base unit identity in the chained network.
Permitted Output: Positive Integers
The Radio Fixed Part Number is an 8-bit DECT cell identity allocated by the
installer. The allocated RPN within the SME must be geographically unique.
Permitted Output: 0 to 255 (DEC) OR 0x00 to 0xFF (HEX)
Base station current firmware version.
Permitted Output: positive Integers with dot (e.g. 273.1)
Contains the hardware Ethernet MAC address of the base station. It varies from
Base station to Base stations.
Current Base station behaviour in the SME network.
Possible Outputs
Connected: The relevant Base station(s) is online in the network
Connection Loss: Base station unexpectedly lost connection to network
This Unit: Current Base station whose http Web Interface is currently being
accessed
With setting “Auto configure DECT sync source tree” set to Enable, this three will
automatically be generated. If manual configured the administrator should
choose the relevant “multi cell chain” level its wants a specific Base unit be
placed. Maximum number of “multi-cell chain” levels is 12.
Format of the selection: “AAAAAxx: RPNyy (-zz dBm)”
AAAAA: indication of sync. source for the base. Can be “Primary” or “Level xx”
xx: Sync. source base sync. level
yy: Sync. source base RPN
zz: RSSI level of sync. source base seen from the actual base
“(Any) RPN”: When a base is not synchronized to other base. State after reboot of
chain.
Base station characteristics in connection to the current multi cell network.
http://ArtTel.ru
Comments to this Manuals